The Buff & Shine Heavy Cutting Pad offers incredible cut and is able to correct oxidized and heavily swirled paint.  Durability of this foam pad is second to none among heavy cutting foam pads.  If you need even heavier compounding level cut then move to the CARPRO Cool Pad, CARPRO Merino Wool, or CARPRO Wool Pad.

Buff and Shine's quality and craftsmanship is second to none.  They start by providing a consistent trim to the Velcro loop from the outer edge of the pad to prevent contact with the paint. Next all of their pads are consistently cut with the side walls of the pad perfectly straight on every pad. Take a look at your current stock of other brands and you will find inconsistent concave sidewalls. This is due to lower quality cutting procedures which B&S does not allow.  With many brands Velcro peel off is often an issue but Buff and Shine uses an adhesive that will never come off...ever. It's heat resistant, chemical resistant and 100% fully washable over and over again. When you purchase Buff and Shine products, they stand behind their products with a 100% guarantee.

Polishing Directions:

• Mix APC, or Dawn Detergent in a bucket of water.
• Allow the pad to soak at least 15 minutes or until vehicle is complete.
• When you are ready to clean, squeeze the solution into the pads and back out a couple times before thoroughly rinsing the pad with clean water.  I like to use the pressure of a hose or under a tap for the rinsing stage.
• Place pads on sides with ventilation between or face down on a clean surface.  I recommend a device similar to that which dishes dry on.