Scholl Concepts S20 BLACK 8oz.
S20 BLACK High Gloss Compound!
Scholl Concepts S20 BLACK is the high gloss compound that delivers on the promise Scholl Concepts made during the first rumors its existence! S20 BLACK is less aggressive than S3 Gold but more aggressive than S30+. S20 finishes down buttery smooth on all paints yet has enough cut to remove typical wear and tear on the paint. It provides good cut, very high gloss, nearly zero dust, and works FANTASTIC with the Spider Pads! As is to be expected with Scholl Concepts iPT diminishing abrasive technology, it finishes down well even on soft paints and cuts well even on the hardest!
My first experience with S20 Black truly caught me a bit by surprise! Albeit I was testing on metallic paint I was still blown away with what was produced in a single cycle of S20 Black via the blue spider pad. After panel wipe, I confirmed it had indeed completely removed the swirls in the area and finished out to an incredible gloss. Next up would be a car with flat black paint, which I had tested on previously and knew to be a paint of the "soft" variety. Again S20 showed itself to finish down to a level that impressed me. One point of note, S20 Black does tend to be on the more oily side of compounds, it's a complete joy to use but we do recommend a good panel wipe afterwards to check results or if coating.
Pad recommendations: S20 Black works well with a variety of pads but I love it with the Blue, Navy Blue, or Honey Spider Pads depending on your goal, paint, and machine.
Pick up your S20 Black today!
Features:
- Finishes to an incredibly gloss even on soft paints.
- Removes p2000-1500 grit defects.
- Saves time and steps.
- Won't stick to paint even on hot surfaces.
- No dusting.
- Intelligent Powder Technology (iPT).
- Free of wax, silicone, and toxic solvents.
- Body Shop Safe - Silicone and wax free.
Specifications:
- Made in Germany.
- 250g.
- Color: Purple.
- Cut: 5.5/8.
- Gloss: 7.5/8.
Application:
- For best results use Blue or Navy Blue Spider Pad.
- After spreading across 2-2.5 Ft area on low speed, work at speed 4-5 applying moderate pressure through the first half of the cycle.
- Next use progressively lighter pressure until finished down. Machine speed varies based on machine and paint.
- Once completed, buff off the faint residue using our Yellow Fellow microfiber towel.
- Clean pad.
- Use only 3-5 pea size drops for each additional section (depending on pad size), repeating steps 2-5 after each section.
