Oberk All Purpose Soap 8oz.
The ultimate organic soap for Professionals and DIY enthusiasts!
Oberk APS soap introduces a new dimension to car care, serving as a hybrid between a car wash soap and an all-purpose cleaner. This unique product not only enhances the washing process but also ensures safety. Oberk APS is plant based, scent free, and naturally biodegradable to be eco friendly and compliant with all regulations. This is an alkaline based soap that will strip waxes and sealants, and works great as a prep wash for a heavily contaminated ceramic coated vehicle. The formula was developed to cover challenges in the car wash process whether washing vehicles in the north, that often operate in snow, as well as the mobile detailers who are always subjected to washing vehicles outside in the least ideal environments. The signature staywet technology has extreme lubrication for gliding over the surface and avoiding the risk of scratching or damaging the vehicle, but also increased longevity before drying out. When used in conjunction with 100% filtered water, it can easily be used by professional detailers who work outside to minimize soap drying on the surface.
This soap concentrate has a Ph of 9.5 (slightly Alkaline) and has extremely great cleaning and stripping properties for removing all the dirt and grime from the surface and leaver a bare surface to prepare for paint correction. While this formula will strip waxes, sealants, and spray silica sealants, it works perfect for maintaining coated vehicles, as it keeps build up from clogging the coating and reducing hydrophobic properties.
If used in a heated pressure washer, or on regularly maintained vehicle, it can be used as a touchless wash by foaming on the surface, then pressure washing to rinse the soap and grime, then proceed to dry the vehicle.
APS is not a thick foaming soap, rather one that lifts, pulls and drops the dirt from the surface down to the ground. Caution for use with vehicles that have raw aluminum or other very sensitive materials. Typically if used in a foamer, it is used to prewash.
Oberk APS is also an excellent choice for cleaning engine bays, wheel wells, and removing bugs. Its versatility makes it a perfect alternative for high-volume shops looking to minimize chemical consumption or streamline their product inventory for better procedure and management efficiency.
By incorporating APS, you can optimize your procedures, clean almost any type of material, while improving the process and profitability at the same time.
Features:
- Alkaline Soap - Ph 9.5 for professional strength cleaning power.
- Plant Based - Environmentally friendly and biodegradable.
- Scent Free - No added scents.
- StayWet Technology - Increases lubricity or "slipperiness" increasing the duration of washing before starting to dry.
- Attacks Salt - Designed to attack Calcium and Salt sprays used in Northern States or areas with snow.
- Bug Cleaning Power - Plant based formula works great at removing bugs.
- Versatility - Can also be used to clean a variety of surfaces from the engine bay to interior plastics. Can also be used for wet sanding slip!
Directions/Precautions:
- This is a professional strength product.
- We recommend the vehicle being in the shade and the paint cool to touch. Applying to hot paint or direct sunlight can cause drying, water spots and short work time.
- NOTE - Always make sure the surface is wet before applying product. If concerned, always try a test spot.
- Caution for use with vehicles that have raw aluminum or other very sensitive materials.
- PH 9-9.5
- 1 capful of product on 8oz bottle = 0.25oz
- Add .5oz per gallon for heavy cleaning. (Ex: 2.5oz for 5 gallons of water)
- Use .25oz per gallon for lightly soiled vehicles. (Ex: 1.25oz for 5 gallons of water)
- 2oz per 16oz bottle or 4oz per 32oz bottle.
- Mix 1:7-1:8 in a foaming sprayer, spray directly on surface, scrub, and rinse (Ex: for a 16oz bottle use about 1.5-2oz of APS solution or 3-4oz in a 32oz bottle).
- If used in extreme conditions like love bugs etc., it can be safely mixed up to 1:4 in a foaming sprayer for a powerful cleaning experience.
- Mix 1:7, spray directly on surface, scrub, and rinse (Ex: for a 16oz bottle use about 1.5-2oz of APS solution) .
- Mix 1:15 for a perfect OEM finish without streaking or rinsing (1 oz per 16 oz bottle).
- Add 1-2 drops of APS concentrate per 2 gallons of water to provide a slick surface that doesn’t bind when wet sanding with a block. Additionally, this solution helps flush and clean the residue without reducing the cutting ability of the abrasive paper like a lubricant typically would. The lubricity of the “stay-wet” technology is just enough for a smooth sanding experience.
