6 1/4" Buff & Shine Orange Medium Cutting Pad
The Buff & Shine Medium Orange Cutting Pad offers good cut and is able to remove moderate imperfections.
Buff and Shine's quality and craftsmanship is second to none. They start by providing a consistent trim to the velcro loop from the outer edge of the pad to prevent contact with the paint. Next all of their pads are consistently cut with the side walls of the pad perfectly straight on every pad. Take a look at your current stock of other brands and you will find inconsistent concave sidewalls. This is due to lower quality cutting procedures which B&S does not allow. With many brands velcro peel off is often an issue but Buff and Shine uses an adhesive that will never come off...ever. It's heat resistant, chemical resistant and 100% fully washable over and over again. When you purchase Buff and Shine products, they stand behind their products with a 100% guarantee.
Features:
- Durability.
- Full surface contact.
- Superior velcro adhesive.
- Velcro backing offset.
- High quality craftsmanship.
- Best suited for Rotary and/or DA polishers with a 6" backing plate.
Major Function:
- Moderate cutting & heavy polishing.
Specifications:
- Material: Euro prepolymer foam.
- Polishing face diameter: 6 1/4".
- Velcro diameter: 5 7/8".
- Thickness: 1".
- Pores per inch: 60.
- Color: Orange.
- Velcro color: White.
- Made in the USA.
Polishing Directions:
- Fasten pad to machine taking care to securely center it on your backing plate.
- Follow polish dependent tips regarding speed, pressure, amount of polish, and priming a clean pad with some products.
- When polishing clean your pad after each section with your foam pad brush before applying a couple more drops of polish for the next section.
Aftercare:
- Mix APC, or dawn detergent in a bucket of water.
- Allow the pad to soak at least 15 minutes or until vehicle is complete.
- When you are ready to clean, squeeze the solution into the pads and back out a couple times before thoroughly rinsing the pad with clean water. I like to use the pressure of a hose or under a tap for the rinsing stage.
- Place pads on sides with ventilation between or face down on a clean surface. I recommend a device similar to that which dishes dry on.
