Collinite No. 476s Super Doublecoat Paste Wax

Collinite’s No. 476s is Collinite’s most durable classic carnauba/polymer blend. Holds up month after month against harmful outdoor corrosives; UV, rain, snow, salt, dust, dirt, grime, bugs, staining and more. Ideal as a winter wax when both lasting shine and all-season/all-conditions protection are equally crucial. Handcrafted and hand-poured in the USA.

Features:

Enhances look and appearance.
Preserves and protects condition of finish against weathering.
Contains no abrasives or cleaners.

Recommended Applications:

Car, truck, boat, bike, RV, aircraft, personal watercraft, snowmobile, ATV, tractor/farm equipment, golf cart, snowplow.
Exterior gel coat, fiberglass, clear coat, single stage and lacquer paints and highly finished wood.
CLEAN, unblemished painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass.
NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic.

Specifications:

Coverage: Depending on finish and conditions, one 9 oz tin for every 10-18 mid-sized cars.
Product consistency: Hard paste.
Sizes available: 9 oz.
Durability: 7-10 months of weather protection (Highest degree of durability of all Collinite waxes).

Directions:

FOR HAND OR DA USE.

Do not apply in direct sunlight and surface should feel lukewarm.
Prepare clean surface via wash and decontamination (As needed also compound/polish/panel wipe).
Apply VERY sparingly in a thin manner to clean dry surface no larger than 2 Sq. Ft. at a time with microfiber applicator.
When wax begins to dry/haze up - Buff off with Slogger side of the Microfiber Madness Dusting Diamond OR with a Microfiber Madness Yellow Fellow.
For added shine and durability, follow up with S-845 Insulator Speed Wax.

Additional Tips:

Applicator pads and removal towels should be clean, free of residue and changed frequently.
Only apply to a CLEAN surface; washed, and free of blemishes, discoloration or other imperfections like swirls or scratches. A clean/properly-prepped surface will ease the application/removal process; improving spread and increasing durability of wax’s bond.
Do NOT apply wax to entire vehicle, or sections larger than recommended before removing, as prolonged drying or cure times may lead to wax hardening on surface; causing streaking or difficulty for some users to remove properly. User assumes risk if recommended cure times are exceeded.
Drying times may vary based on conditions (air and surface temperature, humidity, wind, sunlight etc).
Avoid applying in direct sunlight, or extreme temperatures (over 80 degrees F or less than 55 degrees F). Surface temperatures should be, or feel lukewarm-room temperature to the touch. Do not apply if surface feels cold or hot to the touch.
Safe to use with machine buffer if experienced. Check machine manufacturer’s speed/pad specifications for last step protective waxes that contain no cleaners, abrasives or filling agents.
To further maintain the look and durability of the waxed finish between wax applications, use a car wash soap that is pH neutral and gentle on the paint with no grease-cutting properties. These soaps facilitate a streak-free shine while helping to preserve the applied wax. Avoid heavy detergents or low-grade soaps.