IK Foam Pro 2+ Sprayer 64 oz
Foam your car without a pressure washer!
No longer do you need a pressure washer to foam your vehicle, all you need is the IK Foam Sprayers! These sprayers were specifically manufactured for foaming and cleaning applications and can be used with a wide variety of cleaning formulas! The IK Foam Pro 2+ sprayer provides the user a dense and durable foam suitable for cleaning and disinfecting upholstery, carpets and foaming the of your exterior of your vehicle. In a particularly advantageous way the Foam Pro 2 + sprayer has a compressed air connector; an inlet valve located in the sprayer head that allows the insertion of air into the tank thanks to its universal Schrader valve for connectors worldwide.
Designed for use with chemical agents with surfactant properties (surface active). Dilute your favorite APC, Car Wash Soap or Iron Remover depending on the task at hand. Provided with the sprayer are 3 color coded adaptors for different types of foam production (dry, wet or standard foam).
Features:
- Resistant to most acids and solvents (Chemical Product Table).
- 3 bar safety valve with depressurization option.
- Large opening for easy filling and cleaning.
- Innovative and ergonomic design.
- Strong translucent tank with level indicator.
- Base for greater stability.
- Safety lock.
- Protective sleeve for valve chamber.
- Compressed air connector for easy pressurizing.
- Easy assembly and taking apart for cleaning and maintenance, tool free.
- Special “foam” even fan type nozzle.
- Color coded caps included to identify contents of sprayer and for nozzle storage.
- Comes with three (3) Color-Coded Mixer Adaptors! Creates your choice of dry, wet, OR standard foam.
- Orange: Very wet foam
- Green: Very dry foam
- Grey: Standard foam
Specifications:
- Maximum pressure: 3 bar – 43.5 psi
- Net weight: 1.54 lb
- Gross weight: 1.23 lb
- Useful capacity: 42 oz (1.25 L)
- Total capacity: 64 oz (1.9 L)
Not for use with products such as:
- CARPRO MultiX (Recommended sprayer: IK Multi TR 1 or IK Alkaline)
- CARPRO Bug-Out (Recommended sprayer: IK Multi TR 1 or IK Alkaline)
- CARPRO Lift - Limited
- CARPRO Inside
- CARPRO TarX
- CARPRO Trix
- CARPRO Retyre
Instructions:
- Unscrew the sprayer head by turning it anti-clockwise.
- Fill the tank with water to the indicated maximum of 1,25L – 42 oz.
- Pour the foaming product.
- Screw tightly to close.
- Pressurize the device using strokes (approx. 15). For a good quality foam it is important to pressurize until the valve clicks or pops out.
- To begin spraying, make sure the safety lock is off. Press the handle and, as you work, compensate for the loss in pressure by making more passes.
- Once the work is finished, activate the safety lock and release the pressure by pulling the safety valve.
- If more than one appliance is used with different chemicals, use the identification marker to identify the contents of each appliance by placing it on the end of the handle. To remove it, pull it in the direction shown by the arrows using a tool or pointed instrument.
Cleaning and Maintenance:
- After each use, depressurize the sprayer.
- Collect and dispose of the residual amount according to the legislation, prescriptions, and applicable regulations.
- Clean the appliance with water.
- In the event of obstruction of the nozzle, clean it with water and do not use metallic objects.
- In order to prolong the life of the joints, regularly apply some drops of oil or grease on the moving parts.
- To access the valve chamber, remove the cylinder guard by pulling it firmly.
